1 / 10

Over one billion measurement values: Data logger MSR165 with internal acceleration sensor and microSD card.

2 / 10

Acceleration X, Y, Z axes, data logger MSR165.

3 / 10

MSR data logger with 1000 mAh battery, external sensors and microSD card.

4 / 10

MSR data logger type 165B52 with replaceable Li-SOCl2 batteries, runtime up to 5 years.

5 / 10

Air Cargo Approved: MSR data loggers for transport monitoring.

6 / 10

With the MSR ShockViewer software, extensive measurement data, for example from transport monitoring, can be clearly displayed, quickly analysed and conclusively documented.

7 / 10

MSR ShockViewer: High-performance analysis software for shock monitoring

8 / 10

Reading out the data or charging the battery is done by clicking the clip onto the four gold contacts on the top of the housing. The clip is read out via the USB slot.

9 / 10

Vibrations: where, how, how strong? The MSR165 data logger equipped with G-sensors is often used for applications in industry and science.

10 / 10

Keeps your MSR165 data logger protected: handy little case for storage.

❮ ❯

Data Logger for Vibration, Shock, Jolts: MSR165

• Shock and vibration data logger, acceleration sensor  ±15 g or ±200 g
• Optional temperature, humidity, air pressure and light sensors, analogue inputs
• Records up to 10 bn shocks
• Air cargo approved

Our best-selling MSR data logger for vibration and shocks! The MSR165 is a robust mini data logger, capable of taking 1600 acceleration measurements per second for up to five years.

Over one billion measurement values

The MSR165 data logger can monitor shocks up to ±15 g or up to ±200 g; 32 measured values are recorded even before the shock event takes place. The memory is capable of storing over two million measured values, which is sufficient for recording more than 10,000 shocks; the memory capacity of the logger can be extended to more than 1 billion measured values by using a microSD card. All measured values can be rapidly transferred to a PC or laptop via the USB interface or microSD card for data analysis purposes.

Ideal for long-term measurements

The MSR165 has extremly low power requirements. With the lithium-polymer battery (1000 mAh) you can monitor shocks for up to six months, with replaceable Li-SOC₂ batteries even for up to five years. The MSR power pack, which can be ordered separately, is another option to increase the recording period: The autonomous charging station recharges the internal battery of the data logger during operation, allowing you to record data for up to six times longer.

MSR ShockViewer for analysing shocks and vibrations

The MSR165 data logger comes with the MSR PC software for configuring and analysing the data. For an extensive analysis and graphical representation of the data recorded in shock mode and to automatically create reports, with the MSR165 firmware version 2.00 and later versions, the MSR ShockViewer analysis software, which is specifically tailored to the requirements of transportation monitoring, is at your disposal.