Block Isolation with CRONOS flex modules

imc CRONOSflex amplifier modules provide an additional global block-isolation. For this reason, they are well-suited for distributed installations.

Global block-isolation comprises the entire analog front-end as a whole: all functions of input amplifiers, senor supply, bridge circuits, TEDS, etc. - across all channels. Thus, it does not constitute a complete, independent and channel-wise individual isolation. However, this property does indeed provide basic capabilities for noise suppression due to ground loops. Therefore it is very usefull a in distributed setups and can, to a certain degree, substitute "full blown" individual isolation.

This property arises from the modules' individual isolated power supply.

Download: Summary, Block Isolation

Download: Detailed Information, Block Isolation

White Paper

Calibration with bridge measurements

Whoever is testing, expects their measurements to be precise and accurate! In connection with strain gauge measurements and bridge sensors, the accompanying white paper provides an explanation to a number of terms and concepts that may be a bit confusing at times.

->Download the white paper..

New Vibration Analyzer VM100

This is a new exciting system from Metra. Available with either 3 or 9 channels with additional tacho input for RPM.
Measure vibration simultaneously for up to 24 kHz with 22 kHz FFT bandwidth.
Amplitude-time plotter and FFT module come standard with the equipment.

Read more: VM100 Analyzer

Testing Expo Europe

Testing Expo Europe

Event date:
June 13, 14, 15, 2023

Event location:
Landesmesse Stuttgart
Messepiazza 1
70629 Stuttgart, Germany

Visit imc at booth 1446, hall 10

Strain gauge Acquisition

Strain gage connector

Once a test object is gauged, the connection of a data acquisition system to the strain gauges is a basic task. However, this task can only be performed once the test object is available, and the testing can only proceed once the connections and calibration of the inputs are verified. The connection, using conventional screw terminals, provides a temporary connection that can be easily removed, but this still takes time to insure performance and the correct connectivity.

The imc systems, in conjunction with the optional Termination Boxes from imc Partner A-TECH, can reduce the time needed for connection of each channel dramatically.

What We Offer